Taybetmendî:
- Broadband
- Small Size
- Loss Insertion kêm
Dabeşker/kombiner a hêzê ya 3-alî amûrek e ku bi berfirehî di pergalên RF û mîkropêl de tê bikar anîn û xwedan taybetmendiyên jêrîn e: sê portên ketin/derketinê. Dabeşkerên hêzê yên 3-alî sê lîmanên têketinê hene ku dikarin ji çavkaniyên cihêreng îşaretan werbigirin, an bigihîjin dabeşkirin û veqetandina hêzê.
1.Balance û hevrêzî: Sêwirana dabeşkera hêzê ya 3-alî li ser prensîba hevsengî û hevrêziyê ye ku ji bo domandina amplîtude û taybetmendiyên qonaxê yên sînyala têketinê ye.
2. Performansa berfereh: Dabeşkerên hêzê yên 3-alî bi gelemperî xwedan rêzek frekansa xebitandinê ya berfireh in û dikarin di pergalên RF û mîkropêl de gelek bandên frekansê veşêrin.
3.Winda ketina nizm: Dabeşkerên hêzê yên 3-rê / hevberker bi gelemperî xwedan windahiya têketinê kêm in, dema ku îşaret ji têketinê berbi derketinê ve tê veguheztin windabûna hindiktirîn misoger dike.
4. Tolerasyona hêza bilind: Ji ber ku ew bi serîlêdanên hêza bilind di hişê xwe de têne sêwirandin, dabeşkerên hêzê yên 3-alî bi gelemperî dikarin li hember astên hêzê yên bilind bêyî zirar an tehlûkê bisekinin.
5. Minîturîzasyon û yekbûn: Dabeşên hêzê yên 3-alî yên nûjen bi gelemperî teknîkên pakkirinê û entegrasyonê yên piçûktir bikar tînin, ku wan piçûk, sivik dikin, û dikarin bi amûrên din ên RF û mîkropêl re tevhev bibin.
1. Di pergalên antenna de tê bikar anîn da ku sînyalên ku ji hêla antenna ve têne hilberandin li sê an bêtir wergiran belav bikin;
2. Ji bo veqetandina hêzê, belavkirina hêza sînyala têketinê li gelek riyên derketinê, wek rêzikên amplifikatorê hêzê tê bikar anîn;
3. Di dorhêlên mîkserê de tê bikar anîn da ku sê sînyalên têketinê di yek îşaretek derketinê de tevlihev bikin;
4. Ji bo pergalên ceribandinê, dabeşkirina sînyalên têketinê li sê kanalan ji bo pîvandin û berhevdana performansa sînyalê, wekî hêz, qonax, û frekansê tê bikar anîn;
5. Di pergalên radarê de ji bo veqetandina sînyalên ku ji hêla radarê ve têne wergirtin ji sê an bêtir analîzkeran re ji bo analîzkirin û destnîşankirina cîh û leza armancan tê bikar anîn.
Qualwavedabeşkerên hêzê yên 3-alî ji DC heya 67GHz peyda dike, û hêz heya 300W e.
Hejmara Part | Frequency RF(GHz, Min.) | Frequency RF(GHz, Max.) | Hêza wekî dabeşker(W) | Hêza wek Kombiner(W) | Insertion Loss(dB, Max.) | Cudakirin(dB, Min.) | Balance Amplitude(± dB, herî zêde) | Balansa Qonaxê(±°, Max.) | VSWR(Maks.) | Connectors | Dema pêkhatinê(Hefte) |
---|---|---|---|---|---|---|---|---|---|---|---|
QPD3-0-8000-2 | DC | 8 | 2 | - | 11 | 9 | ±0.8 | 12 | 1.8 | SMA,N | 2~3 |
QPD3-0-26500-2-S | DC | 26.5 | 2 | - | 3 (typ.) | 9 (typ.) | ± 1.3 | ±8 | 2 (typ.) | SMA | 2~3 |
QPD3-0-40000-2-K | DC | 40 | 2 | - | 3 (typ.) | 9 (typ.) | ± 1.3 | ±8 | 2 (typ.) | 2.92mm | 2~3 |
QPD3-0-50000-2-2 | DC | 50 | 2 | - | 3 (typ.) | 9 (typ.) | ± 1.3 | ±8 | 2 (typ.) | 2.4mm | 2~3 |
QPD3-0-67000-2-V | DC | 67 | 2 | - | 3 (typ.) | 9 (typ.) | ± 1.3 | ±8 | 2 (typ.) | 1.85mm | 2~3 |
QPD3-1-300-1-S | 0.001 | 0.3 | 1 | - | 1 | 20 | ±0.4 | ±4 | 1.35 | SMA | 2~3 |
QPD3-5-50-50-S | 0.005 | 0.05 | 50 | 50 | 0.6 | 15 | 0.3 | 2 | 1.35 | SMA | 2~3 |
QPD3-5-1000-50-S | 0.005 | 1 | 50 | 50 | 1 | 12 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD3-10-500-1-S | 0.01 | 0.5 | 1 | 0.15 | 1.4 | 16 | 0.6 | ±6 | 1.6 | SMA | 2~3 |
QPD3-80-300-20-S | 0.08 | 0.3 | 20 | 1 | 1 | 18 | 0.4 | ±5 | 1.3 | SMA | 2~3 |
QPD3-100-200-K1-N | 0.1 | 0.2 | 100 | 10 | 0.5 | 18 | ±0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-100-350-30-S | 0.1 | 0.35 | 30 | 2 | 0.8 | 20 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-100-400-30-N | 0.1 | 0.4 | 30 | 2 | 0.6 | 18 | 0.5 | ±5 | 1.3 | N | 2~3 |
QPD3-100-400-50 | 0.1 | 0.4 | 50 | 5 | 0.6 | 18 | 0.6 | ±5 | 1.3 | N | 2~3 |
QPD3-100-800-1-S | 0.1 | 0.8 | 1 | 1 | 1.5 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD3-100-1000-30-S | 0.1 | 1 | 30 | 2 | 1.8 | 18 | 0.8 | ±8 | 1.35 | SMA | 2~3 |
QPD3-114-178-K3-N | 0.114 | 0.178 | 300 | 50 | 1 | 20 | 0.5 | ±6 | 1.3 | N | 2~3 |
QPD3-134-3700-30-N | 0.134 | 3.7 | 30 | 2 | 3.8 | 18 | 0.9 | ±10 | 1.5 | N | 2~3 |
QPD3-136-174-K3-N | 0.136 | 0.174 | 300 | 20 | 0.8 | 20 | ±0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-138-960-50-N | 0.138 | 0.96 | 50 | 3 | 1.2 | 18 | ±0.6 | ±6 | 1.3 | N | 2~3 |
QPD3-200-250-30-S | 0.2 | 0.25 | 30 | 2 | 1 | 20 | 0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-200-2000-30-S | 0.2 | 2 | 30 | 2 | 1.8 | 20 | 0.8 | ±8 | 1.3 | SMA | 2~3 |
QPD3-225-2500-20-S | 0.225 | 2.5 | 20 | 1 | 1.8 | 20 | 0.8 | ±8 | 1.4 | SMA | 2~3 |
QPD3-336-366-30-N | 0.336 | 0.366 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-380-470-K3-N | 0.38 | 0.47 | 300 | 20 | 0.8 | 20 | ±0.3 | ±3 | 1.25 | N | 2~3 |
QPD3-380-3800-10-N | 0.38 | 3.8 | 10 | 1 | 2 | 18 | ±0.8 | ±8 | 1.5 | N | 2~3 |
QPD3-380-40000-20-K | 0.38 | 40 | 20 | - | 4.5 | 17 | ±0.9 | ±10 | 1.7 | 2.92mm | 2~3 |
QPD3-400-1000-30-S | 0.4 | 1 | 30 | 2 | 0.6 | 20 | 0.4 | ±5 | 1.3 | SMA | 2~3 |
QPD3-400-2000-30-S | 0.4 | 2 | 30 | - | 1.8 | 20 | ±0.8 | ±10 | 1.3 | SMA | 2~3 |
QPD3-400-6000-20 | 0.4 | 6 | 20 | 1 | 2.8 | 18 | 0.8 | ±8 | 1.5 | SMA, N | 2~3 |
QPD3-433-30-N | 0.433 | 30 | 2 | 0.5 | 22 | 0.3 | ±3 | 1.2 | N | 2~3 | |
QPD3-440-900-60-N | 0.44 | 0.9 | 60 | 3 | 1 | 18 | 0.5 | ±6 | 1.35 | N | 2~3 |
QPD3-480-500-30-N | 0.48 | 0.5 | 30 | 2 | 0.3 | 20 | ±0.3 | ±3 | 1.2 | N | 2~3 |
QPD3-480-500-50-N | 0.48 | 0.5 | 50 | 3 | 0.3 | 20 | ±0.3 | ±3 | 1.2 | N | 2~3 |
QPD3-500-700-K15-S | 0.5 | 0.7 | 150 | 20 | 0.6 | 18 | 0.5 | ±6 | 1.3 | SMA | 2~3 |
QPD3-500-3000-30-S | 0.5 | 3 | 30 | 2 | 1 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD3-500-6000-30 | 0.5 | 6 | 30 | 2 | 2.8 | 18 | 0.8 | ±8 | 1.5 | SMA, N | 2~3 |
QPD3-500-6000-K3-4 | 0.5 | 6 | 300 | - | 1.2 | 12 | ±0.5 | ±5 | 1.6 | 4.3-10 | 2~3 |
QPD3-500-8000-20-S | 0.5 | 8 | 20 | 2 | 2.2 | 17 | 1 | ±10 | 1.5 | SMA | 2~3 |
QPD3-500-18000-30-S | 0.5 | 18 | 30 | 5 | 2.1 | 18 | ±0.5 | ±5 | 1.45 | SMA | 2~3 |
QPD3-500-26500-30-S | 0.5 | 26.5 | 30 | 2 | 3 | 18 | ±0.6 | ±5 | 1.6 | SMA | 2~3 |
QPD3-500-40000-20-K | 0.5 | 40 | 20 | 2 | 4.3 | 18 | ±0.8 | ±9 | 1.7 | 2.92mm | 2~3 |
QPD3-555-3400-30-N | 0.555 | 3.4 | 30 | 2 | 1 | 20 | ±0.7 | ±7 | 1.25 | N | 2~3 |
QPD3-600-6000-30 | 0.6 | 6 | 30 | 2 | 2.8 | 20 | ±0.8 | ±8 | 1.5 | SMA, N | 2~3 |
QPD3-698-2700-30-N | 0.698 | 2.7 | 30 | 2 | 0.6 | 20 | ±0.4 | ±4 | 1.3 | N | 2~3 |
QPD3-698-6000-30-N | 0.698 | 6 | 30 | 2 | 2 | 18 | 0.8 | ±8 | 1.5 | N | 2~3 |
QPD3-700-1100-10-S | 0.7 | 1.1 | 10 | - | 1 | 20 | ±0.6 | - | 1.35 | SMA | 2~3 |
QPD3-700-4000-30 | 0.7 | 4 | 30 | 2 | 1.4 | 20 | ±0.8 | ±8 | 1.3 | SMA, N | 2~3 |
QPD3-700-5000-30-N | 0.7 | 5 | 30 | 2 | 1.5 | 18 | ±0.8 | ±8 | 1.4 | N | 2~3 |
QPD3-800-1600-30-S | 0.8 | 1.6 | 30 | 2 | 0.6 | 20 | ±0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD3-800-2500-K2-7 | 0.8 | 2.5 | 200 | - | 0.5 | 20 | 0.3 | 4 | 1.2 | 7/16 DIN | 2~3 |
QPD3-1000-2000-30-S | 1 | 2 | 30 | 2 | 0.8 | 20 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-1000-3000-30-N | 1 | 3 | 30 | 2 | 1.2 | 20 | ±0.5 | ±5 | 1.3 | N | 2~3 |
QPD3-1000-18000-20-S | 1 | 18 | 20 | 0.5 | 1.5 | 17 | ±0.8 | ±7 | 1.7 | SMA | 2~3 |
QPD3-1000-26500-30-S | 1 | 26.5 | 30 | 2 | 2.1 | 16 | ±0.8 | ±7 | 1.7 | SMA | 2~3 |
QPD3-1100-1700-30 | 1.1 | 1.7 | 30 | 2 | 0.5 | 20 | 0.4 | ±4 | 1.25 | SMA, TNC | 2~3 |
QPD3-1500-6200-K15-N | 1.5 | 6.2 | 150 | 150 | 1 | 15 | ±0.5 | ±5 | 1.5 | N | 2~3 |
QPD3-2000-3000-20-S | 2 | 3 | 20 | 1 | 0.5 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD3-2000-4000-20-S | 2 | 4 | 20 | 1 | 0.6 | 20 | 0.3 | ±5 | 1.3 | SMA | 2~3 |
QPD3-2000-8000-20 | 2 | 8 | 20 | 1 | 1.2 | 18 | 0.5 | ±6 | 1.4 | SMA, N | 2~3 |
QPD3-2000-9000-30-S | 2 | 9 | 30 | 2 | 1.5 | 18 | ±0.5 | ±5 | 1.5 | SMA | 2~3 |
QPD3-2000-18000-20-S | 2 | 18 | 20 | 1 | 1.6 | 16 | 0.6 | ±10 | 1.7 | SMA | 2~3 |
QPD3-2000-26500-30-S | 2 | 26.5 | 30 | 2 | 2 | 17 | ±0.7 | ±7 | 1.6 | SMA | 2~3 |
QPD3-2100-8400-20-N | 2.1 | 8.4 | 20 | 1 | 1.6 | 18 | 0.6 | ±6 | 1.15 | N | 2~3 |
QPD3-3400-3800-30-N | 3.4 | 3.8 | 30 | 2 | 0.5 | 20 | ±0.5 | ±5 | 1.25 | N | 2~3 |
QPD3-4950-4970-20-S | 4.95 | 4.97 | 20 | 1 | 0.5 | 20 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD3-6000-10000-20-S | 6 | 10 | 20 | 1 | 1.2 | 18 | 0.6 | ±6 | 1.5 | SMA | 2~3 |
QPD3-6000-18000-20-S | 6 | 18 | 20 | 1 | 1.2 | 18 | 0.6 | ±6 | 1.5 | SMA | 2~3 |
QPD3-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 1.4 | 18 | ±0.6 | ±7 | 1.6 | SMA | 2~3 |
QPD3-6000-40000-20-K | 6 | 40 | 20 | 2 | 1.8 | 18 | ±0.8 | ±9 | 1.7 | 2.92mm | 2~3 |
QPD3-6000-50000-20-2 | 6 | 50 | 20 | 1 | 2.4 | 18 | ±0.9 | ±11 | 1.8 | 2.4mm | 2~3 |
QPD3-7000-8000-20-S | 7 | 8 | 20 | 1 | 1 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD3-8000-12000-20-S | 8 | 12 | 20 | 1 | 1 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-9000-11000-20-S | 9 | 11 | 20 | 1 | 0.8 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-12000-13000-60-S | 12 | 13 | 60 | 60 | 0.8 | 20 | ±0.3 | ±4 | 1.4 | SMA | 2~3 |
QPD3-16000-18000-20-S | 16 | 18 | 20 | 1 | 0.8 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD3-17000-32000-20-K | 17 | 32 | 20 | 1 | 2 | 15 | 0.8 | ±10 | 1.8 | 2.92mm | 2~3 |
QPD3-18000-26500-30-S | 18 | 26.5 | 30 | 2 | 1.4 | 18 | ±0.5 | ±6 | 1.6 | SMA | 2~3 |
QPD3-18000-40000-20-K | 18 | 40 | 20 | 2 | 1.8 | 18 | ±0.7 | ±8 | 1.7 | 2.92mm | 2~3 |
QPD3-18000-50000-20-2 | 18 | 50 | 20 | 1 | 2.4 | 18 | ±0.9 | ±11 | 1.8 | 2.4mm | 2~3 |
QPD3-24000-44000-20-2 | 24 | 44 | 20 | 1 | 2 | 20 | ±0.8 | ±9 | 1.7 | 2.4mm | 2~3 |
QPD3-26000-31000-20-K | 26 | 31 | 20 | 1 | 1.5 | 16 | 0.6 | ±6 | 1.5 | 2.92mm | 2~3 |
QPD3-26500-40000-20-K | 26.5 | 40 | 20 | 2 | 1.8 | 18 | ±0.6 | ±7 | 1.7 | 2.92mm | 2~3 |
QPD3-26500-50000-20-2 | 26.5 | 50 | 20 | 1 | 2.4 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |